Applying Velcro Straps: Quick Tutorial
2024-08-30
Wondering what to do with all the Velcro straps that came with your snug fit slipcover? Don’t worry, we’ve got you covered! This quick tutorial will help you achieve a contemporary, neat, and almost upholstered look for your sofa. Simply apply the Velcro in the designated spots, and voilà! You’ll get a polished, seamless finish. Here’s how:
Prepare your slipcover: First, position the cover on your sofa and get it in place.
Apply the Velcro: Use the Velcro straps to secure the fabric at key points around the edges for a smooth fit.
Secure with a staple gun or hot glue: For extra hold, use a staple gun (recommended) or hot glue to attach the Velcro firmly.
That’s it! With a little time and effort, your sofa will have a sleek, upholstered look that stays put—no more slipping or shifting.
Step 1: Slip Cover onto Sofa
Start by carefully slipping your custom snug fit slipcover onto your sofa. As you do, you’ll notice the Velcro sewn along the inside edges of the cover. This is where the magic happens! The Velcro is designed to help you achieve a tight, seamless fit that stays in place, ensuring your slipcover looks neat and perfectly tailored. Make sure to align the cover properly, adjusting it to get the best fit before moving on to securing it in place with the Velcro.
Step 2: Flip Sofa with Cover On
Once the slipcover is properly positioned, it's time to flip your sofa with the cover still in place. Grab a friend to help—this step is much easier with an extra set of hands! Gently lift and flip the sofa, ensuring the cover stays securely on. Be careful not to stretch or damage the fabric. This step helps you access the underside, making it easier to attach the Velcro straps and ensure a snug, neat fit all around.
Step 3: Measure/Mark Where Velcro Should Go
Now, stretch the fabric of your slipcover to the point where it fits your sofa most snugly.
Step 3: Measure/Mark Where Velcro Should Go
Now, stretch the fabric of your slipcover to the point where it fits your sofa most snugly.
Step 4: Staple Velcro onto Sofa
Once you've marked where the Velcro should go, it's time to secure it in place! Begin stapling the Velcro onto the sofa, making sure it aligns with the fabric of the slipcover. Space the staples about 5-7 cm (2-2.5 inches) apart, depending on how secure you want it to be. Use a staple gun for a strong, durable hold. Once you've attached the Velcro all around, your slipcover should fit snugly and stay in place, creating that neat, upholstered look you’re aiming for.
Step 5: Fasten Cover onto Velcro
After securing the Velcro with staples, it's time for the final test! Carefully fasten the cover onto the Velcro, making sure everything lines up perfectly. Adjust the fabric where needed to ensure it’s snug and smooth, giving your sofa that tailored, clean look. Once it’s fastened, check all edges to make sure the cover stays securely in place. Enjoy your freshly transformed sofa with a seamless, polished finish!
Step 6: Repeat and Admire Your Work
You’ll need to repeat this process on the remaining sides of the sofa to ensure the entire cover is securely fastened. Once you’ve finished, step back and admire your hard work—your sofa will look sleek and custom-fitted! If any staples are out of place or you need to remove one, a slotted (flat-head) screwdriver works great for gently prying them off without damaging the fabric.
Good luck, and enjoy your perfectly updated sofa!